M20B25 dreht bis 1800
Hallo,
hier mal die Antwort eines Mechanikers!
Das hört sich schwer nach einer kalten Lötstelle (möglicherweise im Steuergerät) an.
Hatte mal ein ähnliches Problem. Da würde ich mal ansetzen.
Grüße aus dem Oberbergischen
gesamter Thread:
- M20B25 dreht bis 1800 -
Fuchs-Ja,
26.07.2022, 21:12
- M20B25 dreht bis 1800 -
andi2,9,
27.07.2022, 22:26
- M20B25 dreht bis 1800 - Fuchs-Ja, 28.07.2022, 11:27
- M20B25 dreht bis 1800 -
Oli*,
28.07.2022, 11:00
- M20B25 dreht bis 1800 -
andi2,9,
28.07.2022, 17:10
- M20B25 dreht bis 1800 -
Fuchs-Ja,
28.07.2022, 19:49
- M20B25 dreht bis 1800 -
juergen elsner,
28.07.2022, 20:19
- M20B25 dreht bis 1800 - Fuchs-Ja, 28.07.2022, 20:24
- M20B25 dreht bis 1800 -
HarryE30,
28.07.2022, 20:19
- M20B25 dreht bis 1800 -
Fuchs-Ja,
28.07.2022, 20:25
- M20B25 dreht bis 1800 -
andi2,9,
28.07.2022, 20:36
- M20B25 dreht bis 1800 - dirk_335i, 29.07.2022, 08:15
- M20B25 dreht bis 1800 - andi2,9, 29.07.2022, 09:13
- M20B25 dreht bis 1800 -
HarryE30,
29.07.2022, 11:37
- M20B25 dreht bis 1800 - jojo10, 29.07.2022, 13:54
- M20B25 dreht bis 1800 -
msw68,
01.08.2022, 19:24
- M20B25 dreht bis 1800 - ChrisAS, 02.08.2022, 09:45
- M20B25 dreht bis 1800 -
andi2,9,
28.07.2022, 20:36
- M20B25 dreht bis 1800 -
Fuchs-Ja,
28.07.2022, 20:25
- M20B25 dreht bis 1800 -
juergen elsner,
28.07.2022, 20:19
- M20B25 dreht bis 1800 -
Fuchs-Ja,
28.07.2022, 19:49
- M20B25 dreht bis 1800 - Fuchs-Ja, 03.08.2022, 06:49
- M20B25 dreht bis 1800 -
andi2,9,
28.07.2022, 17:10
- M20B25 dreht bis 1800 -
andi2,9,
27.07.2022, 22:26